• Power: 375W/8 ohms; 600W/4 ohms
• Cab response: 45-18kHz
• 175W as combo/300W with ext. cab

Product Description
Genz•Benz’s amplifiers from the Shuttle series was created for on-the-move bassists who need a flexible, full-featured combo system that is easily transportable and sounds good too.The core of the series is the lightweight Shuttle amplifier design. The 6.0 weighs only 3.75 lbs. and delivers 375 watts at 8 ohms and 600 watts at 4 ohms. Though this is a combo, the amp chassis can be easily removed from it’s combo “saddle” quickly and carried to another gig in the pocket of your bass case or the available carry bag. The chassis has a handle too that makes carrying the cab, just as easy.The head is extremely useful as a standalone unit, with a headphone output that is excellent for quiet, personal practice sessions. You can adjust the volume level and tone you hear with the analog 12AX7 tube preamp, and, using the Post EQ setting on the DI, you can turn the Shuttle 6.0 into an outstanding preamp for recording. It also has an extended range input gain for active/passive sensitivity, effects loop, limiter circuit, LED status indicators, Speakon speaker outputs, tuner out, full XLR direct out interface, aux. input, and a headphone jackThe cab portion of the 6.0-12T combo is a rear-ported, Birch-ply enclosured amp that combines 2 Genz•Benz GNX12300 neodymium 10″ loudspeakers with a custom sourced bullet compression tweeter with attenuation control for a bass combo that is as versatile as it is pleasing to the ear. It’s also got a bottom-mounted, tilt-back stand for angling the speaker cab towards you while you perform.

Genz-Benz Shuttle 6.0-210T 600 Watt Lightweight Bass 2×10 Combo

• 2 x 10″ custom Eminence woofers
• 400W power handling at 8 ohms
• 1″ Eminence tweeter
• tough 18mm plywood construction with carved hardwood corners
• anit-skid surface
• This bass cab is deep, narrow, and easy to move

Product Description
The RS210 bass speaker cabinet has 2 – 10″ custom Eminence drivers and a 1” tweeter. This bass cab is deep, narrow, and easy to move. Two of them give you the sound impact of a 4×10 cab without the bulk and weight. Stack 2 RS 210 bass cabs vertically to create a column that maintains contact with the floor for full bass response but with the upper speaker up where you hear it better.

TC Electronic RS 210 Bass Cabinet with 2×10 Woofers Plus 1 Tweeter Rated 400W at 8 Ohms

• 200 Watts RMS/ 8 ohms
• 2×10″ Paragon Ceramic Drivers with Horn
• Recessed Handles
• Rugged Steel Grills
• 1/4″ and Speakon Input

Product Description
200 watt, 8ohm bass cabinet with 2×10″ Paragon drivers and horn.

Gallien-Krueger 210MBX – 2×10, 200 Watt Bass Guitar Cabinet with Horn

• Power: 450 Watts Speakers: 2 x 10″ Heavy-Duty SpeakersEQ: 6-Band EQ with Sweepable Frequency Notch FilterInputs: Dual Inputs (Passive and Active)Outputs: External Speaker Jack—600 Watts of Total OutputDimensions: 26.8″H x 19.8″ W x 15.2″DWeight: 71 lb.

Product Description
The Acoustic B450 bass amplifier features two inputs—one for passive and one for active pickups, plus input gain and output volume controls. The clip indicator lets you know when your signal is overdriving the preamp, although with the harmonically rich distortion of the B450’s preamp circuit, you definitely should try overdriving it. Add the 6-band EQ and footswitch controlled notch filter into the mix, and you’ve got total tone control. The amp’s tuner Send signal, coupled with the footwitchable mute function, allows you to tune your bass silently on stage.The Acoustic B450 bass combo’s rear panel offers an array of possibilities. The external speaker output allows you to add additional speaker cabinets (down to a 2 Ohm load) for earthshaking bottom, and increases the total output to 600 watts (2 Ohms). The direct out with independent level control—which you can send pre or post EQ—is perfect for getting a solid DI signal to a console for live sound reinforcement or studio recording. The 450-watt bass amp’s effects loop with mix control allows you to work with line-level, studio-grade effects for advanced tone shaping. The B450 is the perfect combo for high-volume club gigs and more.

Acoustic B450 450W 2×10 Bass Combo Amp, Black

• 2 Inputs (Input 2 -6dB Pad), XLR Output with Ground Lift
• Rear Ported Cabinet
• Lacquered Tweed Covering
• 12AX7 Tube Preamp/Efficient Class D Power Amp
• TV Panel Cosmetics with Modern Upgrades

Product Description
Fender® Bassman® TVTM bass combos carry the DNA of the original Bassman, delivering classic Fender bass tone in a package designed to handle the demands of low bass frequencies. With a unique look that is unmistakably Fender, you are sure to class up any stage and cut through the monotony. The Bassman TV Duo Ten offers a warm old school bass tone delivered through a tight sounding pair of 10″ drivers. A nice blend of warmth and focus, the Duo Ten is an amp that will keep your bass sitting fat in the middle of the mix. The warmth of its tube preamp and passive tone stack result in huge bass tone that can be pushed on removable caster wheels. Bring up the gain control for more bite. Engage the deep and bright switches to expand the full range spectrum of your tone. The Precision Bass® guitar was born in 1951, forever changing music and giving birth to a new kind of musician, the electric bassist. Maximizing this amazing new instrument was the mighty Bassman, the original electric bass amplifier. Since that initial inspiration many new musical chapters have been written. Now it’s your turn. Plug into a Bassman TV Duo Ten and make history.

Electronics
Channels : One Channel
Controls : Gain, Bass, Mid, Treble, Volume, Deep and Bright switches
Inputs : 2 inputs (Input 2: -6dB pad)
Line Out : XLR output with ground lift
Hardware
Cabinet Material : Tweed Amplifier Covering
Front Panel : Chrome Front Panel
Handle : “Dog Bone” handle
Knobs : Chicken head-style amp knobs
Pilot Light Jewel : Red Amp Jewel
Miscellaneous
Amplifier Type : Hybrid Tube/Solid State Amplifier
Speakers
Speaker Impedance : 4 Ohms
Speaker : 2-10″ Fender® Special Design Eminence® Ferrite Bass speakers, 8 ohm, 200 watt power rating (each)
Specifications
Amplifier Width : 23″
Amplifier Length : 14″ (35.56 cm)
Amplifier Weight : 61.5 lbs (27.8 kg)
Amplifier Width : 25″ (63.5 cm)

Fender Bassman TV Duo Ten 350W 2×10 Bass Combo Amp, Tweed

• LF Driver: 2×10 Eminence Speakers
• Same Infinite baffle design as other SVT Cabs
• RMS Power Handling: 100 Watts (mono)
• Frequency Reponse (-3dB): 58Hz-5kHz
• Usable Low Frequency (-10dB): 40Hz

Product Description

The Ampeg SVT-210AV: The Portable Cabinet Alternative

The Ampeg SVT-210AV is the portable alternative to a full sized SVT cab. Ideal for bleed-sensitive recording situations where the SVT-810AV can be too loud and live situations where it can be too large, the SVT-210AV is designed using Ampeg’s legendary Infinite Baffle system for maximum speaker efficiency and true Ampeg tone.The SVT-210AV has been designed to follow the classical good looks and features of Ampeg’s renowned SVT-Series cabinets.

The SVT 210AV speaker cabinet is designed as an ideal companion to the Micro-VR amplifier head, available separately.

Like all Ampeg products, your SVT 210AV cabinet is designed by musicians and built using only the best of components. Each cabinet is tested to confirm that it meets Ampeg’s specifications.

Here are some of the features packed into the Ampeg SVT 210AV speaker cabinet:

• Detailed 1970s-era SVT series appearance
• Designed as a stack with the Micro-VR amplifier (available separately)
• Foot cups on the top panel allow secure stacking of a Micro-VR amplifier or up to four empty shot glasses.
• Two ten-inch Eminence speakers
• Two 1/4″ TS parallel input and output jacks
• Nominal impedance 8 ohms
• Power handling 200 W RMS
• Stylish top handle

Ampeg’s SVT Legacy

The SVT has become the bass amp that all rock bassists dream of, whether they’re famous or completely unknown. Ampeg has modified the SVT concept for a wider variety of sounds.

Former Bass Player editor Scott Malandrone put the SVT in perspective this way: “The SVT has done for the sound of electric bass what the Marshall Super Lead had done for the electric guitar–it would give the instrument an identity.”

Ampeg Amps: Built to Work Hard

Ampeg, (a division of Loud Technologies) is recognized world-wide as the premier name in bass and guitar amplification since the 1960’s, when the SVT (Super Valve Tone) bass amplifier took the rock world by storm with its 300 watts, 8 x10″ speaker cabinet and a tone that would go on to set the standard for rock and roll bass. Today, Ampeg continues on as the leader in professional bass gear and a cherished manufacturer of classic guitar amplifier designs with a continuing tradition of advancing bass tone through quality and innovation.

Ampeg SVT-210AV Micro Bass Cabinet 2×10 Speakers

• 320 Watt FET Bass Guitar Amplifier
• Input pad
• Speaker on/off switch
• Mute
• Edge control

Product Description
Bass Guitar Combo Amplifier. Made by Eden.

EN210 Bass Guitar Combo Amp

Two 10″ speakers and one T2004 Wide Range Titanium diaphragm tweeter give this lightweight, versatile combo tremendous warmth with plenty of definition. The compact 2 x 10″ design, make this combo a perfect choice for smaller venues, studio and rehearsal work.

The Nemesis EN combos have been designed with Rock bassists firmly in mind. Eden incorporates several features to address the needs of players who want an aggressive, mix-cutting sound.

Features:

• 320 Watt FET Bass Guitar Amplifier
• Input pad
• Speaker on/off switch
• Mute
• Edge control
• Footswitch
• switchable automatic compression
• 3-way Tone W/ semi-parametric tone
• Effect loop
• DI output with ground lift
• Headphone out
• Tuner out
• Thermostatically controlled fan.

Specifications:

• Speakers: 2 x ES1040XL 16
• Tweeters: T2004
• Crossover: 3KHz – 12dB
• Power Handling: 300W RMS
• Frequency Response: 35Hz – 18KHz
• Impedance: 8Ω
• Sensitivity: 102dB SPL@1W1M

Eden EN210 Bass Guitar Combo Amplifier – 320w, 2×10

• Sends booming bottom-end signals thudding through the chest of everybody within a 200 yard radius!
• 300 watts Output @ 4 Ohms
• 450 watts Output @ 2 Ohms (with extension cabinet)
• 2 x 10 inch speakers
• HF Horn

Product Description
The Marshall MB4210 higher wattage bass combo amp is just what the doctor ordered. The Marshall MB4210 is for those wanting to leave a lasting impression with not only the audience, but also with fellow band members. The MB4210 bass amp will send fat and heavy signals thudding through the chest of everybody within 200 yards! This 450W, 2×10 combo with HF horn has 2 channels (Modern and Classic) with separate EQ for each. The Modern channel features bass, treble, a parametric mid, and a switchable compressor with variable level control. The Classic channel with its ECC83 preamp valve includes a Boost switch, and has a 3-band passive tone network. The MB4210 bass amp also lets you select a blend of the two channels either from the front panel, or via a supplied two-way footswitch. The overall volume of the blend is adjustable in addition to the balance between the 2 channels.

Marshall MB4210 300W/450W 2×10″ Hybrid Bass Combo

• All Tube 30 Watt Class A Construction
• 2×10in Jensen Speakers
• 2 Channel Operation with Bright Switch
• Footswichable Channel Switching and Reverb
• Optional FS2 Footswitch Available

Product Description
The range of VC30 combos offer classic British class A tone in a variety of speaker options. The VC30 features 2 footswitchable channels, with three band EQ on the drive channel and a bright switch. If you’re looking for that elusive living tone then look no further than the VC30. The VC30-112 houses 2x 10″ Custom designed 35 watt drivers. The VC30 generates very little cross over distortion because it runs in pure class A mode – its valves are always hot and ready to roll, which gives it that unmistakable class A sound and feel. If you’ve never experienced that level of connection between a player an amp and a tone then you’ve never tried a VC30. The VC30-210 is voiced through its premium ECC83 preamp tubes and generates 30 watts of power through premium EL84 output tubes. All this sound is run through two 10in Jensen C10Q16 custom speaker to deliver the pure British tone Laney is known for. Laney – Power To The Music

Laney VC30-210 VC Series 30 Watt Class A Guitar Tube 2×10 Combo

• “Mid Scoop” Button, 4-Band EQ
• Auxilliary Input for CD/MP3 or Drum Machine
• Delta Comp Adaptive Compression Circuitry
• XLR Line Out Jack with Ground Lift

Product Description
A high-powered 2×10 combo is a favored implement among bassists for leveling entire city blocks. So brace yourself-the Rumble 350 takes you and your sound to DEFCON 1 by forcing 350 watts of seismic bass power through a pair of 10 Fender Special Des…

Fender Rumble 350 350W 2×10 Bass Combo Amp, Black