Product Description Pair of UHF (655-681 MHz) powered dipole antennas provide effective signal pickup for diversity UHF wireless systems where longer antenna runs are required. Designed for temporary or permanent installation, these antennas are powered by 12 volts provided on the antenna cable by the associated receiver or antenna distribution system. An internal gain-setting switch permits selection of +10 or +4 dB operation. Screw-terminal connections in the antennas are designed for use with RG-58 type or RG-8 type RF transmission cables.
400W of ultra-efficient Class-D Fast Recovery(TM) amplification
High-output 15” woofer and 1” compression driver
Mackie Active electronics provide total system optimization
User-adjustable 3-band contour EQ with sweepable mid-frequency
Mic/Line input for direct connection of single microphone
Product Description Designed by the same team that produced the SRM450v2, the Mackie Thump TH-15A delivers 400-watts of chest-pounding power via Class-D Fast Recovery™ amplification. Mackie Active electronics optimizes the system for amazing performance. And since it can be pole-mounted or used as a wedge, TH-15A represents the best value available for a complete stage solution.
Product Description The SYD 4 delivers deep bass from an enclosed 4¡± x 6¡± subwoofer, while two audiophile quality 3¡± full range drivers provide unsurpassed clarity.
1/4-Inch phone jack analog input. AES/EBU XLR input. AES/EBU XLR thru.
The new Fostex 6301D is equipped with an in-built 10 watt amplifier, perfectly matched to a 10cm full range driver to deliver a big sound, full of clarity.
Product Description Best used in pairs, they accept both AES/EBU digital and unbalanced line level inputs, so they are ideal for use with instruments in project studios, on stage, in remote recording vehicles, video productions & multimedia presentations. Manufactured from cast aluminum, these great little monitors have earned a high reputation among production, broadcast & presentation professionals for being rugged & road worthy. Detailed Specs. AES/EBU digital input. Additional unbalanced analog input (1/4″ phone) for quick analog source monitoring. Digital Through terminal for multiple connections. Built-in D-class power amplifier with 10W output power. Multi-voltage power supply with detachable cable for worldwide use. Identical appearance to the industry standard 6301B for a sense of security. Lightweight yet rugged enclosure. Optional 9610 Bracket Available for vertical / horizontal mounting. Unit: 100mm cone type, magnetically shielded, x 1. Impedance: 4 ohms. Output SPL: 84 dB/W (1m). Frequency response: 80Hz to 13kHz. Rated output power: 10W or more (4 ohms, 1kHz). Residual noise: -60 dBV or less (DIN AUDIO). Distortion: 0.5% or less (10W / 4 ohms, 1kHz). Digital input Connector: XLR-3-31 type. Format: IEC60958 (AES/EBU). Sampling frequency: 44.1kHz to 96 kHz. Digital through Connector: XLR-3-32 type. Format: IEC60958 (AES/EBU). Analog input. Connector: 1/4 Inch phone jack (unbalanced). Nominal input level -10 DdBV. Input impedance 10k ohms or more. External dimensions: 120(W) x 190(H) x 120(D) mm. Weight: Approx.2kg. Power requirement: 100 – 240V~, 50/60Hz. Power consumption: 6W.
Product Description The SYD 4 delivers deep bass from an enclosed 4¡± x 6¡± subwoofer, while two audiophile quality 3¡± full range drivers provide unsurpassed clarity.
Product Description The EMX512SC is a powered mixer with 12 inputs, built-in digital reverb and dual 500-watt digital power amplifiers. It is housed in a sturdy, plastic cabinet that tilts back for easy access. The mixer section is a 12-input stereo mixer that has an effects send, a monitor send, and 3-band EQ. FCL (Feedback channel location) helps pinpoint the offending channel when feedback occurs. The first four channels of the EMX512SC have single knob compression to allow better control of vocals, punching up a bass guitar, or bringing out a quiet bass guitar or kick drum. The effect send is routed to the built-in DSP that provides high quality reverb effects based on the popular SPX processor series. The amplifier section uses Yamaha’s proprietary EEEngine technology for efficiency and cool operation. A switchable YSP circuit tailors the amplifier’s response for the Yamaha Club Series loudspeakers. Numerous line level output jacks on the front panel allow the EMX512SC the flexibility to grow as needed.
Product Description Pair of UHF (541-567 MHz) powered dipole antennas provide effective signal pickup for diversity UHF wireless systems where longer antenna runs are required. Designed for temporary or permanent installation, these antennas are powered by 12 volts provided on the antenna cable by the associated receiver or antenna distribution system. An internal gain-setting switch permits selection of +10 or +4 dB operation. Screw-terminal connections in the antennas are designed for use with RG-58 type or RG-8 type RF transmission cables.
1,000 watt, efficient and lightweight Class D power module Lightweight (27 lb.) Professional appearance and rugged construction Directivity Matched Transition (DMT) and Intrinsic Correction DSP tuning for accurate, undistorted performance across the entire sound field GuardRail technology discreetly protects the system from damaging overload DEEP mode for enhanced low-frequency extension without a subwoofer Locking IEC power cable XLR and 1/4″ connectors Phone Mic/Line and Line inputs with Loop-
Product Description The QSC K8 powered PA speaker is powered by a Pat Quilter designed 1000 watt QSC Class D power module. Extensive DSP processing is employed throughout, providing levels of sonic clarity and total output that defy the system’s size and weight. Plus the K8 is housed in a rugged ABS enclosure with a professional appearance that is at home in any application. ABS is a far more robust material than conventional speaker plastics and offers an additional measure of sonic clarity due to its internal rigidity. Ergonomic aluminum handles and a highly protective steel grille complete the package for ease of transport and long term durability. QSC K8 Powered PA Speaker Features Lightweight portable powered speakers with legendary QSC amplifier power and reliability 1000 watt Class D power module Extensive DSP enhances system performance Attractive and professional appearance Rugged ABS enclosures Tour-grade 18 gauge steel grilles Ergonomic handles with comfortable, non-slip grip 35 mm pole sockets with Tilt-Direct AC_FL_RunContent( ‘codebase’,'http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0′,’width’,'330′,’height’,'223′,’title’,'QSC K Series Powered Pa Speakers’,’src’,'http://www.americanmusical.com/ItemFiles/Flash/QSC_Kseries’,'quality’,'high’,'pluginspage’,'http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash’,'movie’,'http://www.americanmusical.com/ItemFiles/Flash/QSC_Kseries’ ); //end AC code
